AL4424
  • Provides very even illumination along the 116mm length of the light, with controlled fall off in the transverse direction
  • Designed to provide low angle of incidence illumination over a long, wide area
  • Applications requiring very even illumination over a wider area can utilize two BALAs aligned parallel to and facing each other

   AL4554
  • Provides very even illumination along the 246mm length of the light, with controlled fall off in the transverse direction
  • Designed to provide low angle of incidence illumination over a long, wide area.
  • Applications requiring very even illumination over a wider area can utilize two BALAs aligned parallel to and facing each other.

   AL46120
  • Provides very even illumination along the 531mm length of the light, with controlled fall off in the transverse direction
  • Designed to provide low angle of incidence illumination over a long, wide area
  • Applications requiring very even illumination over a wider area can utilize two BALAs aligned parallel to and facing each other

   Bandpass Filters
  • Eliminates all but a narrow band of light (+/- 40nm) from reaching camera
  • Enhances contrast
  • Replace physical shrouding from the inspection environment

   BL020201
  • Surface Mount design provides extremely consistent light over the entire active area of illumination
  • Integral M6 nut channel for easy mounting
  • Available in Red (660nm) and Infrared (880nm)

   BL040401
  • Surface Mount designe provides extremely consistent light over the entire active area of illumination
  • Integrated M6 nut channel for easy mounting
  • Available in Red (660nm) and Infrared (880nm)

   BL1520
  • 50mm x 50mm area of illumination
  • Low profile housing
  • Designed to provide illumination for small objects where significant magnification is required for inspection

   BL18120
  • 100mm x 200mm area of illumination
  • Near saturation performance with 50 micro second pulse widths at F4, and near saturation performance with steady-state operation at F16
  • Available in a range of colors

   BL1960
  • 100mm x 100mm area of illumination
  • Low profile housing
  • Designed to provide illumination for small objects where significant magnification is required for inspection

   BL2850
  • 44mm x 150mm area of illumination
  • Low profile housing
  • Designed to provide illumination for small objects where significant magnification is required for inspection

   BL41192
  • 150mm x 200mm area of illumination
  • Near saturation performance with 50 microsecond pulse widths @ f4, and near saturation performance with steady-state operation @ f16
  • Available in a range of colors

   BL47192
  • 200mm x 200mm area of illumination
  • Available in a range of colors
  • Dual cable Standard unit requires dual output power supply/controller

   BL5420
  • Available in 4mm or 20mm spot sizes
  • Can be used as a diffuse light source
  • Designed to provide illumination for small objects where significant magnification is required for inspection

   BLXXYY01
  • Surface Mount design provides extremely consistent light over the entire active area of illumination
  • Available in 25mm x 25mm (1" x 1") increments up to 1778mm x 1778mm (70" x 70")
  • Integrated M6 nut channel for mounting (hardware included)

   Brackets
  • Mounting brackets for ring lights and diffuse dome lights
  • Uses the same screw that secures the camera position to attach the light
  • Rugged construction

   CS100
  • Single output, true constant current device
  • Signatech signature recognition technology detects the attached light head and sets optimal current levels automatically
  • Available with optional intensity control (Part Number: CS100-IC)

   CS300
  • Dual output true constant current device, providing consistent, optimized power levels
  • Signatech signature recognition technology detects the attached light head and sets optimal current levels automatically
  • Available with optional intensity control (Part Number: CS300-IC)

   CS410
  • Provides independent intensity control for two light outputs
  • RS-232 programmable
  • Front terminal block provides an analog and a digital (on/off) control input for each light output

   CS420
  • User interface provides three button/three digit display (RS-232 programmable as well)
  • Provides independent intensity control for two light outputs
  • Signature technology verifies a light head's electronic signature and automatically sets the appropriate output current level

   DL071
  • Designed for inspecting large, reflective objects
  • Extremely diffuse illumination over an area 18" square
  • Sturdy, metal construction

   DL2230
  • An extremely efficient integrating light source.
  • Compact, space saving design.
  • Provides sufficient illumination for OCR of ink jet printing on the bottom of beverage containers.

   DL2449
  • Even illumination over the full 50mm x 50mm field of view
  • Utilized heat sinking to cool the illumination source. No cooling fan means extremely low maintenance, vibration free performance.
  • Includes high efficiency, coated easy clean dust cover to protect the beam splitter combining glass

   DL3316
  • Even illumination over the full 25mm x 25mm field of view.
  • Designed for use on small parts or in environments with space limitations.
  • Includes a high efficiency, coated easy clean dust cover to protect the beam splitter combining glass

   DL37100
  • Even illumination over the full 75mm x 75mm field of view.
  • Utilizes heat sinking to cool the illumination source. No cooling fan means extremely low maintenance, vibration free performance.
  • Includes high efficiency, coated easy clean dust cover to protect the beam splitter combining glass

   DL38144
  • Even illumination over the full 100mm x 100mm field of view.
  • Utilizes heat sinking to cool the illumination source. No cooling fan means extremely low maintenance, vibration free performance.
  • Includes high efficiency, coated easy clean dust cover to protect the beam splitter combining glass

   DL51120
  • Oblong diffuse light for use with highly reflective materials
  • Extremely even illumination
  • M6 nut channel for convenient mounting

   DL7248
  • Diffuse light source for non-specular objects; available in RGB "all color" version
  • Rugged construction
  • Includes mounting bracket

   DL9160
  • An extremely efficient integrating light source
  • Available in an RGB "all color" version
  • Includes mounting bracket

   EL150
  • Designed to provide low angle of incidence lighting over a long, wide area
  • Available in 34mm (1.33") increments up to 2032mm (80")
  • M6 nut channel for mounting (hardware included)

   EL163
  • Designed for use with line scan cameras
  • Available in 38mm (1.5") increments up to 2032mm (80")
  • M6 nut channel for mounting (hardware included)

   EL174
  • Suited for both large area and line scan applications
  • Available in 152mm (6") increments up to 1829mm (72")
  • M6 nut channel for mounting (hardware included)

   EL193
  • Extremely consistent light over the entire active area of illumination
  • Available in 25mm (1") increments up to 2032mm (80")
  • M6 Nut channel for mounting (hardware included)

   Extension Cables
  • Single and Y Cables
  • 3, 9, and 15 meter lengths
  • For remote positioning of lights

   LL068
  • Perfect for Line Scan Applications
  • 90,000 Lux @ 75mm (3"); 50,000 hour lifespan (white)
  • Fan cooled modular design available in 6" increments up to 96"

   LL2912
  • Ideally suited for use with line-scan cameras.
  • 75mm of intense illumination.
  • Available in a range lenses, which give varying working distances and line widths

   LL3024
  • Ideally suited for use with line-scan cameras.
  • 150mm of intense illumination.
  • Available in a range of lenses which give varying working distances and line widths.

   LL3148
  • Ideally suited for use with line-scan cameras.
  • 300mm of intense illumination.
  • Available in a range of lenses, which give varying working distances and line widths.

   LL5806
  • Suitable for use with line scan cameras or in large area applications
  • 6" of high intensity in a compact housing
  • M6 nut channel for easy mounting

   LL6212
  • For use with Line Scan Cameras or in large area applications
  • 12" of high intensity illumination in a compact housing
  • M6 nut channel for easy mounting

   LL6324
  • Designed for use with Line Scan Cameras or large area inspections
  • 24" of high intensity illumination in a compact housing
  • M6 nut channel for easy mounting

   MS210
  • Provides independent intensity control of four channels through dual slaved outputs
  • RS-232 programmable
  • Front panel terminal block provides an analog and a digital (on/off) control input for each slaved output channel

   MS220
  • User interface provides three button/three digit display
  • Provides independent intensity control of four channels through dual slaved outputs
  • Front panel terminal block provides an analog and a digital (on/off) control input for each slaved output channel

   PS24/PS24-TL
  • Universal input switching supply
  • 24V regulated current DC; Runs on 110-220V AC
  • PS24-TL features tinned leads for use with CS100 & CS300 units

   Pulsar 710
  • 100 Amps @ 100 Volts total output in strobed mode
  • 8 Amps @ 24 Volts total output in constant mode
  • Capable of strobing Ai's largest lights

   RL1360
  • 25mm field of view standard, 35mm FOV optional
  • Solves a wide array of imaging problems where low angle of incidence, radial illumination is required
  • Superb performance for inspecting ball grid arrays

   RL1424
  • Axial light source designed for non-specular objects.
  • Large center opening accommodates lenses up to 55mm.
  • Includes mounting bracket part no. CB100.

   RL1660
  • 35mm field of view standard; 45mm and 70mm FOV optional
  • Solves a wide array of imaging problems where low angle of incidence radial illumination is required
  • Superb performance for inspecting ball grid arrays

   RL2115
  • Designed for inspecting objects needing intense illumination
  • Produces classic dark field effects where incident light relects away from the camera and illumination is created from specular reflections
  • 54.6mm diameter housing

   RL2316
  • Lightweight, super efficient space saving design
  • Axial light source designed for small, non-specular objects or inspections with limited space
  • Sufficient illumination for the recognition of pharmaceutical data codes at rates of 300 to 400 parts per minute, or tablets at rates of up to 2000 per minute

   RL3536
  • Exceptional lighting for inspecting specular surfaces
  • Produces class - 45 degree - dark field lighting
  • For use with lenses up to 55mm in diameter

   RL36120
  • Provides almost twice the illumination of the RL4260
  • Available in RGB all color version
  • Includes mounting bracket

   RL3940
  • Low angle illumination in a compact, 100mm diameter housing
  • Solves a wide array of imagingin problems where low angle of incidence, radial illumination is required
  • Includes mounting bracket CB092

   RL4260
  • Ai's workhorse ring light provides significant illumination in a medium sized housing
  • Available in RGB "all color" version
  • Available with bracket (Part number CB092), or in Barrel Mount configuration

   RL5064
  • Dual functionality - bright field and dark field illumination in a compact housing
  • Dark field and bright field can be used independently
  • Ideal for use in testing or for applications requiring different types of lighting

   RL6512
  • High intensity from a long working distance
  • Rugged housing features efficient thermal handling
  • Optional Waterproofing for use in wash down areas.

   S4000
  • Features Ai’s proprietary Signatech system
  • Provides up to 4 Amps per channel, 4 channels per output
  • Provides Ai’s “All color” RGB light heads with independent power level controls for up to four channels within each light head

   S6000
  • Two independently controlled light head outputs are provided, allowing two cameras to be used in a dual inspection configuration
  • Up to 4 Amps per channel, 4 channels per output
  • The S6000-AS features asynchronous triggering of outputs

   SL1236
  • High intensity illumination for non-specular objects
  • Can be purchased in an RGB version
  • Aimable with Evenlite - choose your optimal working distance and field of view!

   SL2420
  • Ai's most popular spot light - intense illumination in a small package
  • High contrast on non-reflective objects
  • Aimable with Evenlite - select your optimal working distance and field of view!

   SL2507
  • Compact design - 23mm diameter housing
  • High intensity illumination for non-specular objects
  • Two identical SL2507 spotlights can be connected to a single output via a Y cable

   SL4301
  • Designed to replace fiber optics in microscopes and microscopic applications
  • Standard or 5v versions available
  • Available in two diameters for easy mounting

   SL6404
  • High intensity illumination from a long distance
  • Available with built in strobe or wash down options
  • Set for 12" working distance